How about some less contentious election news?
It’s time for CBPA officer elections. The BOD will be accepting nominations for the following positions through October 31st:
Any At-Large Directors
All nominees must be members in good standing of CBPA and willing to further the mission statement of the CBPA. Nominees must provide name and biography to the Nominating Committee available at firstname.lastname@example.org. Please address any questions to this address as well. Remember that you CAN self-nominate! This is your chance to get involved and make a difference in the local industry!
A paper ballot election will be held if there are two or more nominees for the same position.
If there is only one nominee to a position, the Committee will defer to ABPA National Bylaws Section 6.04.1, paragraph 4, last sentence, it states “If there is only one candidate nominated (for Vice President), the candidate shall be declared the winner of the election without the formality of conducting a ballot election.” This will apply to the other positions as well.
By Charlie Sullivan
The Colorado Department of Public Safety, Division of Fire Prevention and Control, requires that all individuals and or companies testing, repairing, or installing a backflow device on a fire sprinkler system be registered with the Colorado Division of Fire Prevention and Control. The requirement has been in place for several years. Over the last few years there have been some significant changes to the requirements, i.e. tagging of systems (this is a big one), main drain test vs draining a system, etc. The current requirements can be found in 8 CCR 1507-11 which has been effective since May 15, 2016. It is your job as a backflow tester performing services on a fire sprinkler system to be knowledgeable of the requirements. The complete text can be found at the following link:
As outlined in 8 CCR 1507-11, Fire Suppression Program, you would be required to register as a Fire Suppression System Contractor – Backflow, which is defined as, “Individuals or companies conducting installation, maintenance, service or testing of backflow prevention devices installed on fire sprinkler systems”.
The testing company and or individual need to be particularly aware of the requirements in Sections 3, 6, 7, and 8. The Division of Fire Prevention and Control is actively pursuing unregistered backflow testers working on fire systems, issuing warnings to register immediately, actively following up on complaints, and if necessary taking legal action through the courts in regards to repeat offenders. The cost of registering with the state will greatly outweigh the cost of a court date.
By Fred Spengler
This year has been quite a ride for the American Backflow Prevention Association (ABPA). But as we move into 2017 there is reason to be optimistic for the future. The organization has moved to a different management company which should help with membership & the newsletter/magazine.
The next big national event is the Backflow & Cross Connection Trade Show to be held in San Antonio Texas on April 3rd through the 5th. If you have the chance, this is a must go-to event. The venue is right on the River Walk and just a couple of blocks from the Alamo. But more important: The seminars will be worth the trip, with two Colorado speakers (Your CBPA President and Vice President) speaking on backflow issues on fire systems and regulations. Add the other seminar topics and your chance to talk with vendors from all segments of the industry and this event is well worth your time.
Membership and benefits will be the emphasis for this coming year so expect lots of communication from National to you, the membership.
On a local level, I want to encourage all who receive this to become or retain your CBPA membership or, if you reside in Utah, your Utah Chapter membership. Once a member, actively participate, if only to attend scheduled events. Of course, there is always need for volunteers. Please step up and support ABPA’s mission of providing information and education.
The Colorado Backflow Prevention Association (CBPA) will be hosting an event in mid-April (Details in the newsletter) that will discuss fire sprinkler system requirements and an open forum on implementing the new State Regulation 11.39.
Utah Chapter will be hosting their annual conference on February 3, 2017. (Check the website for information)
We are hoping to have some big news regarding CBPA coming soon. We realize things have been slow here at backflow.org, but we are hoping that will change in the near future. Check back often so you can be the first to know!
Just a quick note to let everyone know to be on the lookout for our new website, coming soon! We have been in a transition period with our website, http://www.backflow.org, hence this temporary blog. Our new and improved website, after moving to a new domain host, should be up and running soon. It will be the same web address as before, http://www.backflow.org, but it will be using the format found here on this WordPress blog, hopefully with some improvements in functionality. Stay tuned!
We all know how cold winters can be here in Colorado. This winter is turning out to be no exception. Sub-freezing temperatures can be brutal on any equipment that involves water. Obviously that is the case with backflow preventer test kits. Part of my daily duties involves certifying test gauge kits, and I can tell you that I have already come across several kits that have obviously frozen. Not all of them had permanent damage, but at least one certainly did. While I will gladly make repairs to those damaged test kits, we all know it’s not cheap and that cost cuts into your company profits.
With just a few simple steps you can protect your test kit from the cold weather:
- Drain your test kit after each and every test. Open all the valves on the kit and let as much water drain out as possible. Tilt your kit, shake your kit. Dance with it if you have to. Keep doing it until you are sure that you have drained all the water you can out of it.
- Leave the valves open. Once you have drained your kit, don’t close the valves! In fact, open them all the way. This ensures that what water is left inside, if it happens to freeze, has room to expand without (hopefully) doing any damage.
- Keep your kit where it won’t freeze. This is a no-brainer, but I have to say it. If you use a pickup for your testing work, keep the kit in the cab with you when it’s below freezing. A test kit can easily freeze in the back of a pickup while you drive between jobs. Also, bring your test kit inside overnight. It wants a warm place to spend the night as much as you do.
By following these three simple steps you can be pretty sure that your kit will be in good working order when it’s time for your next test. Test kits are not inexpensive, and they certainly can cost a significant amount to repair, not to mention your down time if you don’t have a backup kit available. Test gauge kits are a testers bread and butter, so be nice to them.
A fairly recent case from Louisiana. A lot of folks still don’t think that protection on irrigation systems is necessary. This is exactly why it is necessary.
Greetings everyone. It is the Christmas season, a time to reflect on the past and plan hopefully for the future. So I am pleased to see signs of life in CBPA. Soon we will be getting back to what we do best: providing the backflow industry with information and education. Keep an eye out for emails for upcoming events. Remember this is a membership driven organization so please offer suggestions on what you need from us, attend activities when offered and volunteer your time when available.
So, what would you like to see CBPA doing? Lets continue the conversation.
The video below is a prime example of the importance of backflow prevention, cross-connection control programs, and well trained, knowledgeable backflow prevention assembly testers.